CIT Level 1 Black Mesh MATX Case Glass Front Side 3x ARGB Fans

CIT Level 1 Black Mesh MATX Case Glass Front Side 3x ARGB Fans
CIT Level 1 Black Mesh MATX Case Glass Front Side 3x ARGB FansCIT Level 1 Black Mesh MATX Case Glass Front Side 3x ARGB FansCIT Level 1 Black Mesh MATX Case Glass Front Side 3x ARGB FansCIT Level 1 Black Mesh MATX Case Glass Front Side 3x ARGB Fans
Our Price:  £39.99
(Inc. 20% VAT)



In stock



The Level 1 is a Micro-ATX chassisdesigned with style and purpose while occupying minimal desk space withits smaller footprint.

The Level 1 includes a mesh front panel allows for large volumes of airto pass through unrestricted. To enhance the airflow even further thecase features two pre-installed fans and air ventilation on theright-hand side of the mesh front panel, the air intake is maximised toits maximum potential and with the possibility to mount additional fansand radiators, this is a high quality Micro-ATX where not an inch ofspace goes to waste.

Three 120mm RGB rainbow fans catch the eye with stunning colour modeson offer at the touch of a button not only make the Level 1 stand outbut ensures all important components are catered for when it comes tokeeping temperatures balanced and conditions optimised for a peakperformance.

Moving onto the top of the case the I/O panel provides USB2.0 andUSB3.0 connections as well as controls for your LED lighting using theLED button have access to approximately 14 LED modes and a temperedglass panel showcases your build setup.

Measuring 40.7 centimetres in height, the interior painted in all blackwith a full PSU shroud that adds to the sleek and unobtrusive look.Space to install a M-ATX or Mini-ITX motherboard and for a smallsurface area there is still has plenty of space to install powerfulhardware. It can fit a graphics card up to 33 centimetres in length andbehind the motherboard and PSU shroud users will find space for 3 x 2,5and 2 x 3,5 drives. Underneath the case is a removable dust filtersuitable for an ATX power supply unit measuring up to 160mm will fitinside.

The Level 1 is a small stylish Micro with an iconic look not onlyprovides exceptional airflow but also is perfect at displaying the RGBrainbow lighting. The Level 1 carries some serious power, creating astunning look and functional gaming PC.

Key Features
  1. Mesh Micro-ATX Gaming Case - The CiT Level 1 is a bold andsophisticated gaming case finished in all black with a mesh front panelallows air to flow into the case easily without obstruction combining asuper airflow performance with dust filtration, makes this stylishchassis both comfortable in a state-of-the-art office and gaming room.
  2. RGB Rainbow LED Fans Included - Three RGB Rainbow fans with anine-fin blade fan design and equipped with 8 LEDs adds a stunningfinish. The rear fan generating 24.6dBA for a quieter coolingperformance.
  3. Air Cooling - Cool your system effectively with three fansincluded and the Level 1 offers enough space to house seven fans intotal Front: 2 x 120mm or 2 x 140mm Fans, Top: 2 x 120mm or 2 x 140mmFans, PSU Shroud: 2 x 120mm fans & Rear: 1 x 120mm Fan. TheMicro-ATX casing can also house a 280mm radiator at the top.
  4. Manual Control - Control the three fans manually with just asingle press of the LED button on the top of the I/O, connect the LEDbutton and powered using SATA have access to approximately 14 LED modes.
  5. Tempered Glass Panel - The solid tempered glass side panel offersan excellent view of the interior specifically of the Micro-ATXMotherboard.
  6. Micro-ATX Housing - Mini-ITX and Micro-ATX Motherboards arecompatible and graphics cards up to 330mm in length and CPU cooler upto 165mm in height, there is adequate space for mainstream hardware tobuild a high-powered PC Gaming case.
  7. Dust Filter - One removable dust filter help keeps the dust outof your gaming PC and enhances the cooling performance even further,they are easy to remove which makes them easy to clean.


  • Chassis Dimensions (Excluding Fascia / Panels): (W) 216 x (H) 386x (D) 337mm
  • Water Cooling Support:
  • Front Supported Radiator(s): 120mm and 240mm
  • Top Supported Radiator(s): 120mm, 240mm and 280mm
  • Rear Supported Radiator(s): 120mm
  • RGB Rainbow Fans Included:
  • Front Fan Powered Via: Slave Fan - 4pin Proprietary
  • Front Fan LEDs Powered Via: Slave Fan - 4pin Proprietary
  • Rear Fan Powered Via: Master Fan - SATA
  • Rear Fan LEDs Powered Via: Master Fan - SATA
  • General Specifications:
  • PSU Max. Length (mm): 160mm

Case Specifications

  • Form Factor: Micro ATX
  • Motherboard Support: Micro ATX, Mini ITX
  • PSU Support: Standard ATX
  • PSU Location: Bottom
  • Gaming Case: Yes
  • Water Cooling: Water Cooling Ready!
  • Supported Radiator Size: 280mm
  • Supported Radiator Positions: Front, Top
  • Body Material: 0.6mmSPCC
  • Front Bezel Material: ABS & Mesh
  • Side Panel: Tempered Glass
  • Internal Cable Management Depth: 17mm
  • External Bays:
  • Internal Bays: 2 x 3.5 Internal
  • 3 x 2.5 Internal
  • Drive Bay Notes: 1 x 2.5" shared with 1 x 3.5"
  • Expansion Slots: 4 x Full Size
  • Cooling Front: Space For 2 x 120mm or 2 x 140mm Fans (2 x 120mmRGB Rainbow Fans Included)
  • Cooling Top: Space For 2 x 120mm or 2 x 140mm Fans
  • Cooling Rear: Space For 1 x 120mm Fan (1 x 120mm RGB Rainbow FanIncluded)
  • Cooling Side: None
  • Cooling Bottom: Space For 2 x 120mm Fans
  • Fan Controllers: 0 Fan Controllers, controlling up to
  • 0 fans in total
  • IO Ports: 1 x USB 3.0
  • 2 x USB 2.0
  • 1 x HD Audio
  • 1 x Microphone
  • GPU Max Length: 330mm
  • CPU Cooler Maximum Height: 165mm
  • Front Bezel Colour: Black / Mesh
  • Body Colour: Black
  • System Cabinet Features:
  • PSU Included: No

Model:  1006816
Bar Code:  5055492413567
Part Number:  CIT-LEVEL1-MESH
Brand:  CIT
Form Factor:  Micro ATX
Colour:  Black
LED Colour:  ARGB
Max. Motherboard Size:  mATX
Supported PSU Size:  ATX
Build-in Card Reader:  None
Build-in PSU:  None

Be the first to Write a Review for this item!