GameMax Black Hole ARGB Gaming Case 2x20cm ARGB Fan 1xARGB Hub

Our Price:  £53.99
(Inc. 20% VAT)



No stock


The GameMax Black Hole Mid-Tower gaming case includes two 200mm ARGBRing Fans that cover the full width of the front panel, the Black holeis designed to make building easier, this case is finished with premiumaesthetics for those gamers wanting to go to the next level withoutbreaking the bank.

The two 200mm ARGB fans come pre-installed at the front, whilstproviding a visually striking design they also ensure plenty of air isbrought in to your system.
A GameMax V2.0 ARGB hub included allows for stunning lighting effectsand easy connection to your system. You can connect up to five fans andtwo LED strips to the hub and sync all to your motherboard using the 3Pin AURA connection, please note the hub to motherboard AURA connectionis not included and will needed to be purchased separately. Please notethe included hub supports a total of 5 fans.

The left side panel is made of 3mm tempered glass you can also show offthe aesthetics of your build seen through this stunning glass panel.

Situated on top of the Black Hole is one USB3.0 port, one USB2.0 port,LED & Brightness buttons, HD Audio and Mic Jacks.

In line with the GameMax ethos this case offers style, performance andthe ultimate experience.

Compatible with the Following Fans(not included)

The GameMax Black Hole is compatible with the following fans:
  •  GameMax Mirage Dual-Ring Rainbow RGB 120mm Fan
  •  GameMax Mirage White Fins Dual-Ring Rainbow RGB 120mm Fan
  •  GameMax Razor 120mm Rainbow ARGB Fan
  •  GameMax Velocity 120mm Rainbow ARGB Fan
  •  GameMax ARGB 3 In 1 Kit

Compatible with the Following Hubs(1 x fan hub included)

The GameMax Black Hole is compatible with the following hubs:
  •  Spectrum ARGB Hub
  •  GameMax ARGB Fan Hub

Key Features

  • Design - The Black Hole is a brilliantly designed Mid-Tower PCgaming case and the first GameMax chassis to include two 200mm ARGBfans not only will these look great in your gaming set up but enableexceptional airflow. Fit an ATX motherboard and with plenty of room youcan fit a wide selection of top hardware, meeting most installationrequirements.
  • Motherboard Sync - You can now take your colour control to newlevels with the included ARGB motherboard connection on the PWM hub,simply connect the 3pin AURA from your motherboard and you can use themobo software to sync your fans and strips the way you like.
  • Excellent Airflow - Excellent cooling options are on offer withtwo 200mm fans at the front are not only more efficient but a lotquiter compared to mounting 120mm fans, mount a total of eight fans androom to mount water cooling radiators on the front (Up to 360mm), top(Up to 280mm) and rear (Up to 120mm) your case will have no problemcooling those high end components.
  • ARGB Hub - Included in the Black Hole is an ARGB V2.0 ARGB PWMhub, connect up to five fans and two LED strips, have access to 18colour modes manually or have even more using the motherboard software.Once all connected enjoy PWM auto speed controlled via MBs PWM signal,also 2 RGB buttons (Mode & Brightness), it much better for user toeasy adjust light mode and adjust between 5 different brightness modes(0-20-40-80-100%).
  • Tempered Glass - A 3mm full left side tempered glass panel toshow off your build from all angles.
  • Easy Maintenance - Located on the top of the Black Hole is a dustfilters, helps to prevent dust from getting into your build and helpsimprove the performance of your chassis.


  • Chassis Dimensions (Excluding Fascia / Panels):   (W) 210 x (H) 466 x (D) 360mm
  • Addtional Fan Support:    Space For 2 x 120mm Fans(PSU Shroud)
  • PSU max. Length (mm):    170mm
  • Fan Controller Included:    Yes
  • Fan Controller Power Via:    SATA
  • LED Controller :    Yes
  • Fan Power Connector:    3 Pin Fan Connector
  • LED Power Connector:    3 Pin AURA
  • Fan Control Via:    PWM
  • Supported Qty of Fans (max.):    5
  • Supported Qty of LEDs (max.):    5
  • Packaging Type:    EPE Foam
  • Packaging Thickness (EPE Foam):    23.42mm

Case Specifications

  • Form Factor:    Midi Tower
  • Motherboard Support:    ATX, Micro ATX, Mini ITX
  • PSU Support:    Standard ATX
  • PSU Location:    Bottom
  • Gaming Case:    Yes
  • Water Cooling:    Water Cooling Ready!
  • Supported Radiator Size: 360mm
  • Supported Radiator Positions: Front, Top
  • Body Material:    SPCC 0.5mm
  • Front Bezel Material:    ABS & Tempered Glass
  • Side Panel:    Tempered Glass
  • Internal Cable Management Depth:    25mm
  • External Bays:   
  • Internal Bays:    2 x 3.5 Internal
  • 3 x 2.5 Internal
  • Drive Bay Notes:    1 x 2.5" & 3.5" Shared
  • Expansion Slots:    7 x Full Size
  • Cooling Front:    Space For 3 x 120mm or 2 x 140mmor 2 x 200mm Fans (2 x 200mm Dual-Ring ARGB Fans Inc.)
  • Cooling Top:    Space For 2 x 120mm or 2 x 140mmFans
  • Cooling Rear:    Space For 1 x 120mm Fan
  • Cooling Side:    None
  • Cooling Bottom:    Space For 2 x 120mm Fans
  • Fan Controllers:    1 Fan Controllers, controllingup to
  • 5 fans in total
  • IO Ports:    1 x USB 3.0
  • 1 x USB 2.0
  • 1 x HD Audio
  • 1 x Microphone
  • GPU Max Length:    355mm
  • CPU Cooler Maximum Height:    165mm
  • Front Bezel Colour:    Black
  • Body Colour:    Black
  • System Cabinet Features:   
  • PSU Included:    No

Model:  1006020
Bar Code:  6931858773058
Form Factor:  Mid ATX
Colour:  Black
LED Colour:  ARGB
Max. Motherboard Size:  ATX
Supported PSU Size:  ATX
Build-in Card Reader:  None
Build-in PSU:  None

Be the first to Write a Review for this item!