Improve your gaming aesthetic with the CiT Mirage Glass ARGB PC Case. Featuring six ARGB Dual-Ring Infinity fans as well as providing ample support for all your high-end hardware.Take your setup to new heights with this ATX gaming chassis with a stylish and elegant dual tempered glass panelling this case looks a spectacle. Surrounded from every angle with stylish and sleek fans, customisable RGB lighting and effortless cable management. Within the interior of the Mirage includes cable routing holes on the Motherboard backplate that makes managing your cables nice and easy and keeps your PC looking clean.
Install another two fans to fully populate the Mirage and make it eight fans and with up to two water cooling locations, this case is full of cooling capability.
Stand out with the touch of Infinity, the circular-shaped infinity mirrors at the centre of the fans create a mesmerising LED lighting display with their multi-layer effect. They not only look fantastic but also ensure all components are taken care of for when it comes to keeping temperatures balanced & conditions optimised for a peak performance.
Moving onto the top of the case the I/O panel provides varied connectivity support with USB3.0 and USB2.0 connections and inside the Mirage we have included a 6-port ARGB fan hub with controls for your LED lighting and have access to approximately 26 LED modes or have access to 16.8 million colours using a compatible addressable RGB Motherboard.
This completely white interior has smart build potential with a spacious interior offering wide support for a range of gaming hardware to build a powerful effective gaming PC. It can fit a graphics card up to 30 centimetres in length, CPU Cooler up to 16.5 centimetres in height and can hold 3 x 2,5" and 2 x 3,5" drives. An ATX power supply unit measuring up to 195mm will fit inside.
Build a colourful gaming chassis with ease and create your dream gaming PC using the Mirage.
Key Features - Stylish Mirage - The CiT Mirage is built using a combination of premium materials, the chassis is 0.6mm SPCC steel and the front and left-hand side panelling is made with stylish tempered glass and the side panel has a 30% tint to showcase your ARGB fans and key components. The tempered glass is surrounded by white interior for that classic look.
- High-End Cooling - There are six pre-installed Dual-Ring Infinity fans on the CiT Mirage. There are three 120mm fans mounted onto the front panel, whilst there are two 120mm fans are mounted on the top and a single fan on the rear panel. These fans can be controlled one of two ways either via the integrated LED button on the I/O panel or by connecting the 5V 3pin connector from the hub to your Motherboard.
- Six Infinity 120mm ARGB Dual-Ring White Fans - This version of the CiT Mirage comes with 6 x Infinity 120mm ARGB Dual-Ring White Fans. The Dual-Ring and the circular-shaped, multi-layer Infinity Mirror Design, the Infinity fans add a mesmerising LED lighting display to the Mirage.
- Fan Controller Included - A 6-port hub is included inside the Mirage which allows you to add up to 6 case fans and is powered directly from your power supply via SATA. You can access it using the LED button and can be connected to your Motherboard using a single cable - you can setup without any additional cables.
- Motherboard Software - The ARGB lighting effects can be synced through the Motherboard which supports ARGB function, 5V 3-Pin Addressable RGB header, including ASUS AURA, MSI Mystic Light, Gigabyte Fusion 2.0 & ASRock. Customise the look with endless possibilities with 16.7 million static modes and 12 pre-set lighting effects.
- Tempered Glass Panel - The solid tempered glass side panel with 30% tinted glass adds a premium finish and still offers an excellent view of the interior, components and ARGB.
- Available In Two Colours - The CiT Mirage is available in two colours, black or white. The model of the Mirage is the white, the perfect backdrop for high-end hardware and RGB lighting.
- PSU Shroud - To keep the interior looking neat and tidy the Mirage has a dedicated PSU Shroud that is made with solid steel panelling that perfectly covers the cables, showcases the PSU specs and contains a hard drive mount. The PSU shroud can mount a single 3.5” hard drive only. There are another three hard drive slots available so in total there is 3 x 2.5” and 2 x 3.5” that can be mounted to this chassis.
- ATX Housing - Standing at 450mm high, 203mm wide and 346mm deep the Mirage is compatible with a wide range of components, with 300mm of clearance for GPUs and it can facilitate CPU coolers up to 165mm tall. There are seven expansion slots on the rear panel for PCIe devices.
- I/O Panel - Providing you with a varied connectivity support, the Mirage has a fully equipped I/O panel featuring one USB 3.0, two USB 2.0 and HD Audio, as well as a LED button (Reset Switch).
Specifications - Chassis Dimensions (Excluding Fascia / Panels): (W) 191 x (H) 436 x (D) 330mm
- Water Cooling Support:
- Front Supported Radiator(s): 120mm and 240mm
- Top Supported Radiator(s): 120mm and 240mm
- Rear Supported Radiator(s): 120mm
- Cooling Fan:
- Fan Powered Via: 3pin Fan Connector
- Fan LEDs Powered Via: 3pin AURA
- Fan Controller Support:
- Fan Controller Included: Yes
- Fan Controller Power Via: SATA Connector
- LED Controller: Yes
- Fan Power Connector: 3 or 4pin
- LED Power Connector: 3pin AURA
- Fan Control Via: Reset / LED Switch
- Supported Qty of Fans (Max.): 6
- Supported Qty of LEDs (Max.): 6
- Additional Chassis Specifications:
- PSU Max. Length: 195mm
Case Specifications - Form Factor: Midi Tower
- Motherboard Support: ATX, Micro ATX, Mini ITX
- PSU Support: Standard ATX
- PSU Location: Bottom
- Gaming Case: Yes
- Water Cooling: Water Cooling Ready!
- Supported Radiator Size: 240mm
- Supported Radiator Positions: Front, Top
- Body Material: 0.64mmSPCC
- Front Bezel Material: 4mm Tempered Glass
- Side Panel: 4mm Tempered Glass With 30 Percent Tint
- Internal Cable Management Depth: 20mm
- External Bays:
- Internal Bays: 2 x 3.5” Internal
- 3 x 2.5” Internal
- Drive Bay Notes: 1 x 2.5" shared with 1 x 3.5"
- Expansion Slots: 7 x Full Size
- Cooling Front: Space For 3 x 120mm Fans (3 x 120mm ARGB Infinity Dual-Ring Fans Included)
- Cooling Top: Space For 2 x 120mm Fans (2 x 120mm ARGB Infinity Dual-Ring Fans Included)
- Cooling Rear: Space For 1 x 120mm Fan (1 x 120mm ARGB Infinity Dual-Ring Fan Included)
- Cooling Side: None
- Cooling Bottom: Space For 2 x 120mm Fans
- Fan Controllers: 1 Fan Controllers, controlling up to
- 6 fans in total
- IO Ports: 1 x USB 3.0
- 2 x USB 2.0
- 1 x HD Audio
- 1 x Microphone
- GPU Max Length: 300mm
- CPU Cooler Maximum Height: 165mm
- Front Bezel Colour: White / Smoked Glass
- Body Colour: White
- System Cabinet Features:
- PSU Included: No
